Product Description:
Advanced tweeter
Focal brought some of their high-fidelity technology out of the studio and into your car with the Performance inverted dome tweeters. This technology results in wider dispersion and a higher frequency response, so you'll notice greater detail in the instruments and voices. Each tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging, a big help in vehicles where the speakers are not optimally placed.
Technology that sounds like magic
Focal applies molten glass microballs onto cellulose pulp to create their Polyglass cones, combining the crisp response of the rigid glass layer with the warm sound of a paper cone. The aluminum tweeter has been similarly treated with a softer, more easily damped material that makes the treble distinct without sounding harsh. You can expect superior performance from these speakers, whether you power them with a quality outboard amp or your car stereo.
Product Highlights:
2-way 6"x9" speakers (pair)
Polyglass woofer with butyl rubber surround
processed aluminum inverted dome tweeter
grilles included
4-ohm impedance
5-80 watts RMS power range (160 watts peak)
Frequency response: 55-20,000 Hz
Sensitivity: 93.6 dB
Depth: 3-5/16"
Warranty: 1 year
Specification:
Sensitivity: 93.6 dB at 2.83 volts
Frequency Response: 55 -20k Hz
RMS Power Range (Watts): 5-80
Peak Power Handling (Watts): 160
Impedance (Ohms): 4
Top-mount Depth (Inches): 3 5/6
Bottom mount Depth(Inches): 3 3/4
Features:
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Voice Coil: The voice coil is wound around a 1-1/5" diameter low-mass Kapton former, ensuring no coil deformation.
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter rotates on its post, so it can be pointed toward the listener.
Product Description:
Advanced tweeter
Focal brought some of their high-fidelity technology out of the studio and into your car with the Performance inverted dome tweeters. This technology results in wider dispersion and a higher frequency response, so you'll notice greater detail in the instruments and voices. Each tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging, a big help in vehicles where the speakers are not optimally placed.
Technology that sounds like magic
Focal applies molten glass microballs onto cellulose pulp to create their Polyglass cones, combining the crisp response of the rigid glass layer with the warm sound of a paper cone. The aluminum tweeter has been similarly treated with a softer, more easily damped material that makes the treble distinct without sounding harsh. You can expect superior performance from these speakers, whether you power them with a quality outboard amp or your car stereo.
Product Highlights:
2-way 6"x9" speakers (pair)
Polyglass woofer with butyl rubber surround
processed aluminum inverted dome tweeter
grilles included
4-ohm impedance
5-80 watts RMS power range (160 watts peak)
Frequency response: 55-20,000 Hz
Sensitivity: 93.6 dB
Depth: 3-5/16"
Warranty: 1 year
Specification:
Sensitivity: 93.6 dB at 2.83 volts
Frequency Response: 55 -20k Hz
RMS Power Range (Watts): 5-80
Peak Power Handling (Watts): 160
Impedance (Ohms): 4
Top-mount Depth (Inches): 3 5/6
Bottom mount Depth(Inches): 3 3/4
Features:
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Voice Coil: The voice coil is wound around a 1-1/5" diameter low-mass Kapton former, ensuring no coil deformation.
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter rotates on its post, so it can be pointed toward the listener.