Product Specification:
Amplifier main
Channel Configuration 1(Mono)
High Pass Filter Yes
Slope : High Pass Filter Yes
Low Pass Filter 50-300Hz(Variable)
Slope : Low Pass Filter 12dB/oct
Rated/THD(14.4V, 20Hz-20kHz)
At 4ohm 330W×1 / 1.0% (20-200Hz)
At 4ohm-BTL Yes
At 2ohm 600W×1 / 1.0% (50Hz)
Maximum(14.4V)
At 4ohm 600Wx1
At 4ohm-BTL Yes
At 2ohm 1100W×1
(GP1)
Frequency Response 10-300Hz
Tolerance +0.5/-3dB
Signal to noise ratio(S=Rated output) 100dB
Total harmonic distortion(1kHz) 0.1%(50Hz)
CEA Power output 330W×1
CEA SN Ratio 65dBA
(GP2)
Active Thermal Control(ATC) Yes
Dynamic Distortion Suppressor(DDS) Yes
Input: Speaker level input Yes
Line Out Yes(Through)
MOSFET: Output stage/Power supply Yes/Yes
Bass Boost 40Hz, 0-10dB
Line in: Input sensitivity(V) 0.3-6
Gold Plated Connectors Yes
Load capability: 1ohm/2ohm No/Yes
Current drain(rated output power at 4ohm) 30A(at 4Ω)
Instruction Manual Language
English Yes
Site Link: http://www.sony.co.in/product/xav-68bt
Product Specification: Amplifier mainChannel Configuration 1(Mono)High Pass Filter YesSlope : High Pass Filter YesLow Pass Filter 50-300Hz(Variable)Slope : Low Pass Filter 12dB/octRated/THD(14.4V, 20Hz-20kHz)At 4ohm 330W×1 / 1.0% (20-200Hz)At 4ohm-BTL YesAt 2ohm 600W×1 / 1.0% (50Hz)Maximum(14.4V)At 4ohm 600Wx1At 4ohm-BTL YesAt 2ohm 1100W×1(GP1)Frequency Response 10-300HzTolerance +0.5/-3dBSignal to noise ratio(S=Rated output) 100dBTotal harmonic distortion(1kHz) 0.1%(50Hz)CEA Power output 330W×1CEA SN Ratio 65dBA(GP2)Active Thermal Control(ATC) YesDynamic Distortion Suppressor(DDS) YesInput: Speaker level input YesLine Out Yes(Through)MOSFET: Output stage/Power supply Yes/YesBass Boost 40Hz, 0-10dBLine in: Input sensitivity(V) 0.3-6Gold Plated Connectors YesLoad capability: 1ohm/2ohm No/YesCurrent drain(rated output power at 4ohm) 30A(at 4Ω)Instruction Manual LanguageEnglish Yes Site Link: http://www.sony.co.in/product/xav-68bt
Social Connect |
Others |
My Account |
Help |
Payment Options![]() |